110v Ballast

the-hat

Active member
Credits
71CR
ok so playing millipede last night, pop noise, cab went off followed quickly by my electric. The fuse in the power brick had blown. Changed the fuse and put the electric back on, all working except the marquee light. closer inspection with a meter reveals that the ballast is bad. Of course its a 110v one. Can i source one in Europe ? Or is it just easier / better to put a 240v one in and change the started and the power source on the brick to 240v for the marquee ?

This is the second atari cab ive had this happen to (black widow last time). Think i just changed it all to 240v on that, cant really remember now..

Thanks ;)
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
You need a 110v 50mhz ballast. Not the easiest things to find, but not impossible. I would stick with originality rather than hack in a 240v light.

I need to order one of these myself:

http://www.jukebox-world.de/en/Lamps-Accessories/Starter-Ballasts/Ballast-14-22W-120V.html
Purity2015-05-17 11:55:42
 
Top