So I've had this machine for around 5 year and in that time it has been rock solid. I initially did a cosmetic and board refurb. New interconnect cable. Reflowed all headers. New big blue. Recapped the ARII board. Installed the relevant components to give more control over the screen setup. At the time I had a thread going on here after I managed to create a short in the ARII board resulting in a blown 5v reg and no sound. All fixed with the help of Talon2000.
Today when I turned on I got this...
https://youtu.be/qYigZPTkaZ8
I have done some googling and looked at similar issues on YouTube but I'm going to need some help fault finding this issue. It seems the problem lies in my analogue output as everything that is effected is none 3d based.
As can be seen in the vid.. the mountains, moon, score, lives, radar and sites are all screwed up.
I'd be very grateful if anyone can point me in the right direction. If needs be I'll even buy a used oscilloscope of eBay to get this sorted.....
Just an added note....a Braze high score kit was installed last month so this can cut out any game rom issues? Plus there are no beeps on test screen.
Cheers for any info...
Kev
Today when I turned on I got this...
https://youtu.be/qYigZPTkaZ8
I have done some googling and looked at similar issues on YouTube but I'm going to need some help fault finding this issue. It seems the problem lies in my analogue output as everything that is effected is none 3d based.
As can be seen in the vid.. the mountains, moon, score, lives, radar and sites are all screwed up.
I'd be very grateful if anyone can point me in the right direction. If needs be I'll even buy a used oscilloscope of eBay to get this sorted.....
Just an added note....a Braze high score kit was installed last month so this can cut out any game rom issues? Plus there are no beeps on test screen.
Cheers for any info...
Kev