2532 programming advice needed please

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
Hi Guys

I been pulling my hair out with regards to 2532 chips

I have had many programmer that all claim to be able to do them but they cant

can anyone advise me on a cheap as possible programmer that I can get to have in addition to my others that will do 2532

ideally I would like advice where the chip has been tested and confirmed working

thank you
 

philmurr

Active member
vacBacker
Feedback
48 (100%)
Credits
2,374CR
The GQ-4x will do Hitachi HN462532's OK

If you're having trouble send them down to me with the files you want programming and I should be able to do most types
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Yep, as per Phil Sarj, i have a gq-4x and i can persuade it to program most 2532's.

If there's something you need programming and can wait until Monday i don't mind doing it.

I need something that can do proms
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
cheers guys

i used to have a GQ-4X and i thought i was upgrading it, well to an extent i did as the newer on does all that GQ cant but these 2532s are really kicking me in the backside

poor old pac-man will have to wait longer to get 6J fixed

Thank you phil and James for the offer of programming, i have asked Virtvic if he can do it for me so if he cant i will ask one of you,

but in the long terms sake i do need something that will do them and i don't want to re invest in a GQ again as they are around £100

i am going to give a parallel port programmer (PC50B) a go as its fairly cheap to buy and if it doesn't work i wont be crying as i am now with my $650 programmer that says it can but cant do 2532s
 

ben76

Hunts Spies
Feedback
7 (100%)
Credits
1,136CR
If it comes to the gq-4x needed to burn the roms, I can do that with mine. Also its a great programmer, just a shame it doesn't do TTL and GAL's

- Ben
 
Top