Battlezone said:I just came across this year old thread, and thought it might we worth a quick revisit.
I've had a 3D printer for a while now and to be honest there are not many arcade
parts that I'd trust it to print. The finish and strength simply aren't good enough
for the human interface (at least with my low-end printer).
I did however think it would be great for printing invisible things like board
spacers (I always seem to be missing these on boards).
What other thoughts of things to print have people had? (max 21x21x18cm)
I'm aware of the OutRun wheel gear on thingiverse.
$fn=36;
difference() {
union() {
cylinder(r=48.2/2.0, h=1.4);
translate([0,0,1.4])
cylinder(r1=48.2/2.0, r2=31.66/2.0, h=3.9-1.4);
difference() {
cylinder(r=31.66/2.0,h=18.91);
translate([0,0,18.91-1.5])
cylinder(r=27.45/2.0,h=1.5+0.1);
for(i=[1:40]) {
rotate([0,0,360/40*i])
translate([31.66/2.0-0.7,0,3.9])
cube([0.7,0.7,18.91-3.9+0.1]);
}
}
}
translate([0,0,-0.1])
cylinder(r=6.9/2.0+0.14,h=16.0+0.1);
translate([0,0,10])
rotate([0,90,0])
cylinder(r=4.0/2.0,h=31.66/2.0);
translate([0,0,10])
rotate([0,90,90])
cylinder(r=4.0/2.0,h=31.66/2.0);
}