6100 Bottlecaps

aeroflott

A different league
Feedback
16 (100%)
Credits
1,061CR
Can someone point me in the right direction as to what bottlecap transistors I need for a WG 6100 vector monitor?

I'm about to recap one and might as well replace those while I'm here.

Ta.
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
I dont change these unless there faulty.
Check the 3 wires that connect to each one as they tend to break usually as ur just re connecting everything back once te fitting.monitor/connections.
The type is in the manual i cant remember of the top of my head but there are 2 types iirc 4 in total.
Id advise the lv2000 mod too if ur doing a re cap.
There.will also be lots of dry joints to re flow.
Fun
smiley36.gif
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
I've also used MJ15003 + MJ15004 as subs with no problems in the past. MM's paste/pads advice +1 too.

I need to buy some myself actually, wheres the best place/price these days guys?

Dan
 

karlcdoe

Active member
vacBacker
Feedback
8 (100%)
Credits
887CR
DanP said:
I've also used MJ15003 + MJ15004 as subs with no problems in the past. MM's paste/pads advice +1 too.

I need to buy some myself actually, wheres the best place/price these days guys?

Dan

Yep, cheaper and better specced than the original, I suspect all the originals for sale on the 'net are dodgy copies anyway. I got the last lot of MJx from Farnell, even better if there is a discount voucher offer on...
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
The MJ's are what I use on WG6100's you'll need 3 of each.

Much better spec.

Give everyone a tip with 6100's - turn down the G2 on the flyback and SCREEN on the neck and balance the colours out with the drives and cutoffs.

Otherwise if on a Star Wars cab you will hear "rattling" every time you get hit by a fireball or blow up the death star which will shorten the lifespan of your new transistors.

My SWCP monitor has worked flawlessly for about 4 years now.

I just need to fix its board as its got flat tie-fighters lol.
 
Top