6100 help

lost in cables

Active member
Feedback
5 (100%)
Credits
68CR
Hi,
Where do I start? 6100 issues.

Ok…….. no b+ no neck glow, hear chatter, no spot killer.

HV r901 burn up any ideas? Q’s look ok, caps all replaced. Diodes 901 ,2 seem ok

Hi I hear chatter but HV no neck glow have +- 28 on hv going in. 3.4v on heater pair. All fuses ok must be a few issues and HV.

Jez.
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
A bad Q900 would burn R902, but so would a bad flyback or bad zener diode (zd901, zd902).

Q900 is bolted to the case, make sure it is isolated.

PM me if you want me to wing you some zeners.
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
Use this chart to check voltages;

TestPoints.jpg
 
Top