Adapter PCBs

GrahamN

Newbie
Credits
2CR
Hi

I am just starting to get involved again with repairing arcade boards after a 20 odd year gap, and am looking for adapter PCBs. I used to have some boards that were just tabs each end, but non-connected - just going to points in the board that you could solder wires from point to point in order to change the connections for non Jamma boards, or to put test points in etc., but I can't find anything listed anywhere I've looked.

Do such boards still exist (I really can't remember where I got some from originally) - the only boards I've been able to find are specific adapters for certain boards, but at £20+ each that's an awful lot to pay when this is really just a hobby. The alternative is just to wire edge connectors to appropriate cables, but I didn't really want loads of wiring looms hanging around, and the pcbs were just very easy to store.

Any suggestions?
 

GrahamN

Newbie
Credits
2CR
Thanks - they aren't exactly what I'm after (I really want the edge connectors on both sides so that I can solder a female connector on one side and just wire pins up as required), but they do look useful so I've sent a pm.
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,332CR
Wow, 5 of them for around £15 - that's a brilliant price!
smiley1.gif
Can't really be any significant profit in that, it's so cheap.
I'll be ordering some later.
 
Top