Adding player start buttons

jrm88

User
Credits
13CR
Good evening, I'm planning to modify my tmht 4 player cabinet a little to play some new boards I recently picked up. The first thing I'm going to have to do is add start buttons for each player

Has anyone done this in the past ? I'm looking to get 1 and 2 player buttons sorted before moving on to the kick harneses.
 

jrm88

User
Credits
13CR
So would that just entail soldering a wire from the p1 start slot on the Jamma to the p1 coin button ? I would have to rewire any of the ground connections ?
 

AaronBoone

Active member
vacBacker
Feedback
3 (100%)
Credits
165CR
Morning!

The Hero Turtles cab has 4 x player start buttons - the ones for P1 and P2 should be normal JAMMA standard so if you hooked up another board it should just be a case of adding credits and giving them a prod.

And when you say kick harness, are you plonking something like Street Fighter II in it or do you mean harnesses for the 3rd and 4th players? If you've got some more 4 player boards like X-Men or Simpsons all the wiring is already in the cab, it's just a case of connecting the harness to the new board.

Cheers, Steve.
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
jrm88 said:
So would that just entail soldering a wire from the p1 start slot on the Jamma to the p1 coin button ? I would have to rewire any of the ground connections ?
Yep simple as that, no need to add a ground as there's one already there.
 

jrm88

User
Credits
13CR
Thanks guy's, I know it has 4 player buttons but they don't function as actual start buttons. Sorry I meant the harnesses that came with it. I figure from muddys advice I'm just going to place some from each of the Janna pins to the 4 player buttons and see if that works.

I picked up a Spiderman board as well which I belive will need the start buttons and an adapter for players 3 and 4 which I think I will just try and build myself.
 

bomjac

Active member
Feedback
3 (100%)
Credits
453CR
Piggy back spade crimps to hook in to existing connectors. 3.4mm spade? is around the size, in red. I am sure someone will correct me if wrong.

http://www.maplin.co.uk/p/maplin-spade-terminal-piggy-back-connecters-red-l26ay
 

jrm88

User
Credits
13CR
Thanks bomjac I picked up the connectors from maplins at the weekend.

Only question issue I have now is where to connect the third player and fourth player start wires to the harnesses. Can I just use the empty slots after the attack button ?
 
Top