allen/hex keys

Squilla

Newbie
Credits
15CR
Guys,

any one know where I can get hold of allen keys that are the correct sizes for the screws on Atari yokes?

The set that I have are all either too big or too small to fit the screws. If you can point me in the direction of a retail outlet that sells arcadey tools that would help me out a lot!

thanks

Ps also 2 trigger microswitches and 1 plastic trigger...

Squilla2013-06-21 22:53:10
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
The Atari stuff is Imperial. Maplin and others sell an Imp set in one of those red rubber containers.

I did grind down a metric to fit some of the non-standard Atari bits. LMK if Imperial doesn't work and I'll measure my DIY bit.
 

Russ J

Active member
vacBacker
Feedback
1 (100%)
Credits
233CR
They are Imperial on the SW yoke Tim,

This is where I got my Imperial (UNC) allan keys from,they also do UNC bolts as well just incase you need any that need replacing...

http://www.modelfixings.co.uk/index2.htm

For exact sizes you need for the Yoke look in the service manuel (I assume you have the manuel ? if not i'm sure that its online somewhere in PDF file,but i'm not sure where though?)
Russ J2013-06-21 23:58:37
 
Top