Another classic arrives.....

[glstar]

Just arrived....(well yesterday to be honest)....

What's it????? :awe:
.
.
.
.
.
.
.
.
.
.
.
.
.
Yes, of course it's it...... :lol:

 

[Alpha1]

woohooo!! Nice score buddy

 

[Dex-Jay]

I guessed what it was, but not the colour!
Blue - Limited Edition?? 3 Spoke Alloy Wheel Decals? That's how you roll bro!

I used to love playing this and Sega Enduro Racer the full size upright that you lean back on to jump!

 

[Bods]

Nice to see the original Coin Door, I'm changing mine to that type when I get the surround bit

Think mine is the only one so far thats got the support bars to raise it off the wheels, you had a look yet to see if this has wheels on it still, as it's looked very close to the ground in the ebay pics

So glad you got this one over the Red original

 

[glstar]

woohooo!! Nice score buddy

Thank you Alpha.

I guessed what it was, but not the colour!
Blue - Limited Edition?? 3 Spoke Alloy Wheel Decals? That's how you roll bro!

I used to love playing this and Sega Enduro Racer the full size upright that you lean back on to jump!

Thank you dear.

I didn't see those model since a long time (well to be honest the red one either...

)...

I also have the enduro racer, but not the upright....the deluxe sitdown....

Both should be wonderful near each one....

Nice to see the original Coin Door, I'm changing mine to that type when I get the surround bit

Think mine is the only one so far thats got the support bars to raise it off the wheels, you had a look yet to see if this has wheels on it still, as it's looked very close to the ground in the ebay pics

So glad you got this one over the Red original

Why are you talking about the original coin door?

Your's is not original?????

Yes of course this too don't have the bars but fortunately have the wheels.

I'm glad too, even if this one is currently not working and need a very intensive job to be restored...

You know that i need your help, yes?

Yesterday i look at it just to discover that inside is a mess...all dirty.....
The cab is not starting because of some mouse crunching some cables.....
Fortunately Sega always did a great job with wirings, so recognize the broken cables should not be a big problem.

It would be great if you could send me some pics of your internal so i can compare and see where i have to reconnect the cables.

Plus i also need some detailed pics of the bars (with measurements too), so i can have them reproduced.

And just before i forgot...a pics of the part where the monitor is into, since mine have a gap between the moto itself and the monitor and i don't know if there should be some type of glass or similar......

Do you also have the manual for this cab?

I know that i ask you much informations, but remember that it's your fault/merit if i get this machine.....

 

[glstar]

Yesterday i manage to dismount the cab and i discover that the pcb is broken since i test it on my super hang on upright.

There are some resistor broken too (circled in red).....
I also see comparing this board with another super hang on board i have, that they are the same boards with different roms on it.....
Could be fine to change the eeproms from the LE to the super hang on board?
This should be work?
My intention is to repair the LE board if this is possible....
Some hint on who could perform this repair?

 

[Bods]

I can't get to mine at the moment, but luckily I have some pictures of it stripped down as I moved it down the arcade building and took photo's while cleaning and rebuilding

Yes, my coin door is the same mars multimech type that is on the only flyer of LE Hang-On, I prefer the original Mechanical type and will change it sometime, but I think mine was fitted original to the machine, it's probably programmed to DM or Euro too

I search fo the coin arrow bit above the mechs, I'll pm you and get some pics to ya

 

[Bicton]

Incredible score glstar I hope you can fix the problems on the pcb and enjoy that jewel asap.

Well done mate!

 

[ataritoobin]

Nice pickup!!

Think mine is the only one so far thats got the support bars to raise it off the wheels, you had a look yet to see if this has wheels on it still, as it's looked very close to the ground in the ebay pics

I'm actually looking to fabricate this for my red Hang-On as it sways too much without it while playing. Best I can tell it's either a U shaped bar or a full square. Do the bolts that attach it to the game only go through one side of the bar or all the way through both sides?

I do have the covers at least

 

[glstar]

I can't get to mine at the moment, but luckily I have some pictures of it stripped down as I moved it down the arcade building and took photo's while cleaning and rebuilding

Yes, my coin door is the same mars multimech type that is on the only flyer of LE Hang-On, I prefer the original Mechanical type and will change it sometime, but I think mine was fitted original to the machine, it's probably programmed to DM or Euro too

I search fo the coin arrow bit above the mechs, I'll pm you and get some pics to ya

Thank you dear.

I'm now in process to dismount all the cab to completely restore it.

Let me know when you can send me some pics of yours please.

Let me also have a picture of the part you're looking for, since i cannot understand....

Incredible score glstar I hope you can fix the problems on the pcb and enjoy that jewel asap.
Well done mate!

Thank you.

I'm trying to restore it completely.

We're also doing scan of all the artworks too.

QUOTE=ataritoobin]Nice pickup!!

Think mine is the only one so far thats got the support bars to raise it off the wheels, you had a look yet to see if this has wheels on it still, as it's looked very close to the ground in the ebay pics

I'm actually looking to fabricate this for my red Hang-On as it sways too much without it while playing. Best I can tell it's either a U shaped bar or a full square. Do the bolts that attach it to the game only go through one side of the bar or all the way through both sides?

I do have the covers at least

[/QUOTE]

Thank you.

I'll do the side rails too, if Bods can take some shots of his.

 

[glittering-prize67]

looks pretty awsome,that should keep you occupied for a while,just look them pcbs,wow,where do you start with that