AR2 problems

simonden

Active member
vacBacker
Feedback
20 (100%)
Credits
1,042CR
Got an AR2 with only +2.77v on the +5v line (-5v and +12v are fine).

Just looking that the board, R5 is completely burnt out and giving a reading of 430 ohms.

Can someone please confirm the value of R5 so I can replace it?

Looking at the schems, I can't tell if it says 27 1W or 2.7 1w or 271 (squiggly line), etc..

Thanks
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
IIRC, TIP32 provides feedback to the LM305 voltage regulator so that's always a likely culprit, those 305's do go but not all that often if treated right.
 
Top