Arkanoid scrambled screen

BGOllie

User
Feedback
2 (100%)
Credits
29CR
Got an arkanoid cab a couple of weeks back. It was working fine, been playing it most days but no more than like 20 mins at a time.
played it for an hour today and it suddenly gave me this scrambled screen.

14448893_10154554758138276_8911293676043179490_n.jpg


This is my first cab, I've never really tried to fix boards before and my experience with a soldering iron is limited to console region mods and a few easy , well documented, fixes on amiga boards. In a nutshell, I'm handy and willing but not knowledgeable :)

Any tips and first (and second step) I should take towards fixing this ?

Thanks

olonguet2016-09-21 19:34:13
 

dj_yt

Active member
Feedback
3 (100%)
Credits
787CR
Not sure if it's useful but I have a working bootleg that I posted in the for sale section a while back. :)

Edit: Posted it here

£35 shipped.

dj_yt2016-09-22 09:34:01
 

BGOllie

User
Feedback
2 (100%)
Credits
29CR
I'm not sure I'll check later when it's had time to "cool" :)
I was also told to check the socketed chips for heat and re-seat them . I'll try this tomorrow.
 

BGOllie

User
Feedback
2 (100%)
Credits
29CR
So a look at the voltages straight off the AR II board shows the +5v outs are constantly shifting between +4.9v and 5.2v . When the board is plugged it this changes between 4.9 and 5v. Before I continue checking voltage down the boards, is this normal ? I would have expected the output to be constant.

So I've a few questions :)

Is this normal ?

Do repair kits exits (caps and whatnot)
Down the line I would be looking at getting a couple of IC. Is there a good website for these ?





olonguet2016-09-27 19:38:22
 
Top