Monstermug
Active member
Can anybody with an original asteroids cocktail cabinet take a photo of the plug that plugs into the power brick for me please? I need to see the color of the wires and their position.
Reason is I am getting
8vac across 11-13
18vac across 8-9
and no voltages on 6-7
According to schematics I should be getting
60vac across 11-13
6.3vac across 8-9
36vac across 6-7
Only thing I changed was to replace the big blue (26000uf 15v) with a 27000uf 25v replacement and replaced the fuse holder and a couple of blown fuses.
Before that it actually powered up but monitor took ages to turn on. (even with two blown fuses ??)
I suspect the wiring may have been modified by an op in the past? Either that or the transformer is faulty? I am pretty sure I put all the wires back in right place
DC voltages are good. 10vdc ish for across 1-4
Reason is I am getting
8vac across 11-13
18vac across 8-9
and no voltages on 6-7
According to schematics I should be getting
60vac across 11-13
6.3vac across 8-9
36vac across 6-7
Only thing I changed was to replace the big blue (26000uf 15v) with a 27000uf 25v replacement and replaced the fuse holder and a couple of blown fuses.
Before that it actually powered up but monitor took ages to turn on. (even with two blown fuses ??)
I suspect the wiring may have been modified by an op in the past? Either that or the transformer is faulty? I am pretty sure I put all the wires back in right place
DC voltages are good. 10vdc ish for across 1-4