Asteroids error codes

petercasino

Active member
vacBacker
Feedback
8 (100%)
Credits
212CR
I've got an Asteroids machine that I'm trying fix.

When I switch it to the self test mode the machine makes 3 high tones then 1 low tone, which means that the ram at location R4 is bad according to this page: http://www.mikesarcade.com/cgi-bin/spies.cgi?action=url&type=info&page=asterrcodes.txt

I've tried known good 2114 ram at this position but I still get the same tones. I've replaced the ram buffer 74LS245 at R2 and there's no difference. Has anyone got any idea of what else might be causing the problem? I'm getting 5V at the pcb and I've recently rebuilt the AR board.

I'm fairly new to pcb repair so any help would be appreciated!

Cheers,

Mike
 
Top