Asteroids folded grid

Nes4life

Active member
vacBacker
Feedback
12 (100%)
Credits
1,134CR
I've got an Asteroids pcb that now plays but the test grid is folded back on itself on the X and Y axis. I've socketed and swapped in working DACs, 4016s and TL082Cs. I'd piggybacked parts of the vector state machine (finding a couple of dead ICs in the process in order to get to this point) but now it feels like an analogue issue in the vector output section. The bottom left corner is fine but the other 3 quarters are folded back equally. The trimmers can be adjusted and the screen expands but doesn't unfold. Could it be a cap, resistor or voltage regulator with a bad value affecting both axis in the same way?

Anyone had this issue before or know what I should be testing?

kUvSwRi.jpg
Nes4life2017-08-02 08:38:15
 

chadsarcade

Lord of Vectors (tm)
Feedback
11 (100%)
Credits
443CR
The deflection trannies are on the monitor, this is on a scope.

Looks like you're getting practically no +ve deflection in either the X or Y axes. Have you checked the 15v regs?
 

Mitchell Gant

Active member
vacBacker
Feedback
2 (100%)
Credits
888CR
chadsarcade said:
The deflection trannies are on the monitor, this is on a scope.

Looks like you're getting practically no +ve deflection in either the X or Y axes. Have you checked the 15v regs?

Also check the +8.2V and -8.2V supplies, I've seen a few bad Zeners on Asteroids boards.
 

Nes4life

Active member
vacBacker
Feedback
12 (100%)
Credits
1,134CR
Thanks all! The 3rd voltage regulator isn't kicking out +15V on the third pin (it reads as -0.8v). I compared that with a working PCB. It's got 24v on the first pin so I think it itself is at fault (rather than a diode or something feeding it). First time i've had to deal with this area when it wasn't a DAC, 4016 or TL082C - so am familiarising myself with voltage regulation and what the two large capacitors achieve.

For reference the three vector voltage regulators (left to right) should have the following pin outs:

- 7915 (G, -24v, -15v)

- 7805 (24v, G, 5v)

- 7815 (24v, G, 15v)

I've ordered a handful of each to keep in stock for my other asty repairs.
 
Top