Astro Blaster repairers?

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
I went to see a friend of a friend today and he had an Astro Blaster mini, which was coming up with a red screen only - dead.

I reseated a few of the boards in the stack (they had worked themselves free) and it now has some sounds and a yellow and red garbled display.

He'd really like to get it working as it is an awesome little machine.

Any on out there that does repairs on these old boards?
 

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
Calling DanP or Guddler to the stand!
smiley2.gif
 

RaveN

Active member
vacBacker
Feedback
1 (100%)
Credits
1,325CR
As you can imagine, it's not an easy one to work on, and I don't think you can get a fluke pod on it when it's all in the cage.
It does have a pretty thorough self-test though , does it work enough to be able to run it?
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
Its a pain in the backside, extender cards are available to make individual boards accessible though when in the cage.

I do have a Test Rig for an AB, but have yet to put it together.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
I have done a bunch of them in the past. It's easy enough, you just remove the back plane from the cage and make up a wooden framework instead. You have to be aware though that there is a voltage you need - -12v I think that if you don't use the correct voltage you WILL kill the memory on the boards (can't remember which RAM it is). And that's right, it IS the -12v. You cannot use -5v for any length of time.

There's also a few very obsolete components in there too!

Sorry Vic, I'm up to my ears in stuff at the moment and not really taking on repairs. Plus, I'll be honest they are one board set I despise. When I fixed a few of them for Ordy it took forever. You'd fix one board in the stack only to have another die on you and I went round and round in circles until they were eventually all working! It taught me one hell of a lot about how interrupts interact with each other on this inter-board setup mind
smiley36.gif
 
Top