atari ar2 problems

bazookajo

Newbie
Credits
8CR
Hi guys just cranked up my star wars machine and nada.

Checked out my ar2 and my 5v is fluttering between 5.1 and 5.2 and my 10.3 is showing as 13.3

I also swear they started sightly lower.

Can anyone suggest a sensible next move for an electronics moron?

And what are the chances the ar2 has wrecked my game boards :(

Many thanks in advance

Joe
 

tb lilley

5 Star
vacBacker
Feedback
2 (100%)
Credits
1,686CR
10.3 showing as 13 3 is fine. The 5.2 at the AR is almost certainly fine too - you'd be better off measuring the 5V on the StarWars PCB as probably too low if anything by the time the 5V gets there. But your AR board looks fine for the +5V.
 
Top