ATARI AR2 REGULATOR PCB

ColinD

Active member
Feedback
6 (86%)
Credits
1,367CR
Presume you have done the sence mod , due to having accurate 5v's....

That looks all ok to me too....

Don't know why you are seeing 28.5v on pin 10 , but its unused ? - So is Pin 7.... Check if the parts are fitted that are in the dotted lines... the ar2 might have come from another game that used them....

The -5v should look more like -5v once you load it up.... this is common.....check with the game board connected....

If you need rams, give me a shout..... you are also welcome to bring the monitor round and can test it in my machine if you like ? - If the game pcb is a quick fix I might be able to sort that out too while you wait !! - I will trade the Rams and my time for four cylindrical shaped canisters containing a liquid known as Kronenbourg 1664 ;-) - Which reminds me, must update my Avitar, lol !!

Did you check the voltages on the HV cage connector ? This will show if you have regulation or not and also if the Hv is kind of working giving the 181v out... You don't need the game board in place either. You might want to order a LV2000 kit which is really easy to fit.... http://www.vector-repair.com/

Ps... Do you know any decent paving contractors in the Wirral who do a good quality job for a reasonable price without bodging / using cost cutting exercises..... ?

ColinD2014-09-15 19:52:26
 

Stevros

Active member
Credits
506CR
ColinD said:
Presume you have done the sence mod , due to having accurate 5v's....

That looks all ok to me too....

Don't know why you are seeing 28.5v on pin 10 , but its unused ? - So is Pin 7.... Check if the parts are fitted that are in the dotted lines... the ar2 might have come from another game that used them....

The -5v should look more like -5v once you load it up.... this is common.....check with the game board connected....

If you need rams, give me a shout..... you are also welcome to bring the monitor round and can test it in my machine if you like ? - If the game pcb is a quick fix I might be able to sort that out too while you wait !! - I will trade the Rams and my time for four cylindrical shaped canisters containing a liquid known as Kronenbourg 1664 ;-) - Which reminds me, must update my Avitar, lol !!

Did you check the voltages on the HV cage connector ? This will show if you have regulation or not and also if the Hv is kind of working giving the 181v out... You don't need the game board in place either. You might want to order a LV2000 kit which is really easy to fit.... http://www.vector-repair.com/

Ps... Do you know any decent paving contractors in the Wirral who do a good quality job for a reasonable price without bodging / using cost cutting exercises..... ?

Thanks Colin, yes i done the sense mod, i haven't got around to checking the monitor yet to be honest i haven't got a clue what i am doing, I'm just taking all you guys kind advice and doing as you all say which i am extremely grateful for
smiley20.gif


Equites has kindly sold me a set of IC`S.

I`m going to order all the bits i need to rebuild the monitor, thanks for that link, i have been looking for the LV2000 mod with no luck, i emailed whoever owns the website in your link to see if they still sell the mods and ship to the UK 2 days ago but i have not had a reply as yet.

Kronenbourg 1664, my favorite
smiley36.gif


I don`t know anyone who does flagging, not anyone who knows what they are doing anyway but i don't mind helping you out one weekend if you fancy tackling it yourself?
I will give anything a try, i managed to AstroTurf our back garden on my own
smiley36.gif

Stevros2014-09-15 20:12:05
 

ColinD

Active member
Feedback
6 (86%)
Credits
1,367CR
I'd hang fire rebuilding the monitor... Best to make sure its running first... or whats up with it....why... ? - Well you might fry some of the fresh semiconductors if there are any major issues....

Have your tried metering the chassis transistors yet as in Gavins guide ? - Also have a go at measuring the voltages on the HV unit....

You can invest in some MJE15003/4 if you want to beef the deflection and psu up... you need 3 of each.... Maybe some fresh Mica insulators and thermal grease too....

You also want a couple of nice fresh psu caps on the deflection board at the very least along with the LV2000 - Yes, Just click the paypal and you should get them in a few days all being well.... I've not tried the lite version myself.
 

Stevros

Active member
Credits
506CR
Just updated the caps and transistors on this, will test the voltages again tomorrow.

It was fine but had all original parts as far as i could tell, should be good for another 30 years now.

Thanks BBZ147 for help with parts
smiley20.gif
 
Top