Atari led buttons

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I need to refurb a couple of Atari led start buttons. I know 5v goes into the LEDs but I have looked on the net and some people mention they were fitted with 3v LEDs and had a resistor wired to reduce the voltage.

Surely I can just use 5v LEDs?

I know it's a stupid question but thought I would ask before buying any.

Cheers
 

obcd

Active member
Credits
3,830CR
It wouldn't suprise me that those 5V led's are just led's with a serie resistor as well.

Sometimes, they ask exotic prices for those.
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Do they actualy need a resistor? Surley it is just 5v to the led and it lights? Is the resistor or maybe diode to prevent current going back to the pcb?

Steve
 

obcd

Active member
Credits
3,830CR
The resistor limits the current that flows trough the led.

A led expects 5 - 15 mA to light up normally.

The voltage over the led at it's normal lighting current depends upon it's color and remains constant.

So, 5V - 1.2V / 220 ohm = 17mA

(Assuming the led voltage is approx 1.2V)
 
Top