Atari Star Wars woes again

andycole

Newbie
Credits
18CR
Hi all

Just a year or two after I last got my Atari Star Wars going again (power supply issues last time) I have more problems. It does still run but there's an issue in the game play and the display:
The problems only seem to occur in the 'towers' level, the towers seem to 'flicker' between normal and mis-shaped, for want of a better word, that is, one of the vector points will move briefly and the adjoining lines will be re-drawn so the tower is a different shape to what it was. This happens constantly during the towers wave. Additionally, the towers seem a lot harder to hit than they should be. I'm sure it's not my skills that are diminishing! I can send a dozen shots at the top of a tower and still miss. I can get some hits but 9 times out of 10 the hit is not registered. I'm not sure if these 2 problems are related.

Any ideas what might cause this and more importantly, how to go about fixing it?

Oh, and I can't remember if I mentioned when it happened, but a year or so ago, I met Dave Prowse and got him to sign the cabinet and the instruction manual! He signed on the top of the flight controller: Dave Prowse is Darth Vader" :)

Cheers

Andy
 

edwoodjnr

Active member
vacBacker
Feedback
2 (100%)
Credits
246CR
Andy, have you tried reseating the socketed chips?

Also you can try Retroclinic who can repair Star Wars boards for you. Mark provides an excellent service
 

andycole

Newbie
Credits
18CR
I think I did run the self test with no issues, although I'll run it again to check.

I definitely have not looked at or fiddled with the board, I'll give that a go as well.
Thanks for the replies.

Andy
 

Dex-Jay

Active member
Feedback
4 (100%)
Credits
375CR
Touch / Fiddle / Mess with nothing on the board until you've done that self test bud! Do that and go from there!

smiley1.gif
 
Top