Atari StarWars attract quirk...

bazookajo

Newbie
Credits
8CR
Hi Guys - got my star wars boards repaired and all looks okay in general and the game seems fine.

Only thing that seems to be an issue is that the instructions on the attract screens seem to have a bit of a problem area between instruction 1 and instruction 2 (I have attached a link to a short video to illustrate the issue).

Anyone got any ideas where I should start?

Many thanks in advance

Paul;.

http://youtu.be/CpqJBQrJubY
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
bazookajo said:
Thanks Equites

No errors displayed, all beeps normal, but on second thoughts this looks a bit weird....

http://youtu.be/Gz1UA8xci_4

Definitely a problem there, that should be one solid rectangle and with 90 degree angles.

I have seen a similar problem to that before. I can't remember which kind of IC it was but was in the AVG section.
 

bazookajo

Newbie
Credits
8CR
Thanks Equites

In that case it might be one that has to wait for the next major repair given it's imperceptible impact on the rest of the game.

Still - will drag out my backup set to see if the situation is any better.

Many thanks again

Paul.
 
Top