Atari StarWars Matrix Errors

bazookajo

Newbie
Credits
8CR
I am lucky enough to be the owner of an Atari cockpit starwars machine I bought for my 21st birthday for £350 (not going to tell you how long ago THAT was).

Anyhoo just brought it out of storage and I am confronted with a slew of matrix errors.

Just checking that this is a repair job and not something that will right itself after 4 days drying out or is it going to be one for Vectorglow to perform his Wizardry?

Also playing with the idea of a SW/ESB multi game - would this make the matrix errors irrelevant - effectively bypassing all the legacy workings?

Thanks in advance and very best regards

Paul.
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
Welcome to the forum.

if it was in a damp place you may very well have pcb corrosion. So on top of the matrix error pic, a pic of the pcb might help also.
 

bazookajo

Newbie
Credits
8CR
Alpha1 said:
Welcome to the forum.

if it was in a damp place you may very well have pcb corrosion. So on top of the matrix error pic, a pic of the pcb might help also.

This may very well be the problem...a major issue to repair?
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
bazookajo said:
Equites said:
Post details of the Matrix Error, a screenshot would be useful for correct diagnosis.

Matrix errors as follows:

NNNF FNNN F555

NNNF NFFF 6555

NNNF NFFN FAAA

NNNF NFNF 3AAA

Okay, have you checked voltages first?

It will probably be a problem in the AVG board layer.
 

bazookajo

Newbie
Credits
8CR
Equites said:
bazookajo said:
Equites said:
Post details of the Matrix Error, a screenshot would be useful for correct diagnosis.

Matrix errors as follows:

NNNF FNNN F555

NNNF NFFF 6555

NNNF NFFN FAAA

NNNF NFNF 3AAA

Okay, have you checked voltages first?

It will probably be a problem in the AVG board layer.

Okay took some video last night and it looks like the Matrix errors have increased?!

As you say - next step - voltages :)

BTW does Starwars always take eons to start up from cold?
 

lix

Active member
vacBacker
Feedback
1 (100%)
Credits
546CR
From my own memory of SW pcb repairs those error codes should be denoting there's something wrong with the data within the mathbox memory, which by the looks of it is affecting some bits in the top of the 16bit data bus. It might either be a memory or buffer chip gone, try replacing the 6116 2K sram memory chips at 5F and 5H on the main CPU board. Or at least swap 5H & 5F and see if the ?555 changes to 55?5, if so then 5F was the most likely candidate. If it wasn't the memory chips then I'de say next likely candidate could be the 74LS245 at 4F which feeds data to the top 8 bits of the mathbox.

True story - I once replaced nearly every single chip on a SW boardset to repair it back in the 90's, that included making my own AVG custom replacement. PSU had died and taken absolutely everything with it. That was fun!
 
Top