Badlands

Kenth333

Active member
Feedback
3 (100%)
Credits
114CR
It has the isolation transformer and power right under the monitor and something is causing interference. The drawer pulled out the picture is great. Slide it in and the bottom screen gets wavy. I doubt it caused any interference back in 89, but now that the parts are aged it's a problem (corroded iso shielding?).

2014-02-25-2342.jpg
2014-02-25-2340.jpg


Any ideas on what it could be? Thought I'd ask here before replacing anything. Leads (as is) are too short to move anything around. I've checked the connections are solid.

I'm guessing I'll just have to first try the power then the transformer, but thought I'd ask and hopefully save me some trouble.
Enough of that with the outrun.

Thanks!
 

Kenth333

Active member
Feedback
3 (100%)
Credits
114CR
It wasn't the power.
I also noticed that the power wasn't grounded to outlet so I did that too, after trying a new power supply, but still has the same wavy lower screen.
 

RaveN

Active member
vacBacker
Feedback
1 (100%)
Credits
1,325CR
I would guess it's EMI from the transformer.
Those laminated core transformers give off shed loads of EMI, hence why you usually find them sitting at the bottom of the cabinet. When a transformer is so close to a monitor it tends to be a toroidal type.

Did Atari position them there? If so, I'm probably wrong, as the EMI won't increase with age.
 
Top