I fixed several Battlezone but this time i'm really stuck...
Math board is good (tested with another Analog board)
Game don't run, seems looping somewhere but watchdog is not barking.
I checked with fluke 9010A bus, ram, rom, and the following signals:
WDCLR, VGGO,COINCK,SINP, OPT0, OPT1, I/O, EI/O, DATA ENABLE, all external data bus, and related signals, the 244 buffers N11, R1,P11 to be sure some data line tied high or low during I/O.
VCTR, HALT are present.
OP0, OP1 and OP2 are stuck but LATCH1, DVG4, DVG5, DVG6, DVG7 are present and related 74LS175 is good
Signal STROBE 2 from J7 is missing but is NOT tied high form other ic or shortcut and the IC is good. I tried to lift pin 7 and measure it
I checked and replaced all VSM chips:
- latch (74LS175) atL K8, J8
- custom BPROM K7
- 4-line to 10-line decoder (74LS42 ) at J7
- dual D-FF (74LS74) at J10
- shift register (74LS194) at D5, D6, C5, A5, A6, B5
- C6 (74S00)
- B6 (74LS14)
Somebody can help me??