Bubble Bobble Boot GFX issues

Brettster

Arcade, and the Chuck Norris effect
vacBacker
Feedback
23 (100%)
Credits
1,276CR
Recently got myself a super bobble bobble board
seems to work fine except for some slight gfx issues
looks like some tiles are missing leaving black boxes here and there
bub1.jpg


Also when using the water bubbles it tends to leave numbers all over path of the water

bub2.jpg


I've tried the redux roms and the Lost cave for bootleg roms (3,4,5) but think this may be a gfx rom on the lower board?

not really skilled when it comes to repairing these things yet.
 

Brettster

Arcade, and the Chuck Norris effect
vacBacker
Feedback
23 (100%)
Credits
1,276CR
I've unplugged one side of the cable to slit the boards to check the traces etc but I'll try the other connector too :)
One other thing I've noticed is that the bubbles in the intro and the p2 insert coin animations wrap from the right to the left of the screen a bit too not sure if this is connected or just a bootleg side effect
 

Brettster

Arcade, and the Chuck Norris effect
vacBacker
Feedback
23 (100%)
Credits
1,276CR
I've tried reseating all the socketed roms and cable but made no difference but what I have since noticed is that the missing parts only affects the left hand side of the screen, this also affects the yellow boarder on the very left side of the level progress screen when its game over
also when any icons appear on screen when you get a potion most of the ones on the left either dont animate or dont disappear when you have collected them
so perhaps its not a faulty eprom, ram perhaps?
 
Top