Cap Kit Recommendations

LAZORIAN

Active member
vacBacker
Feedback
2 (100%)
Credits
260CR
Hey all, I have a few monitors and other things that could do with replacement caps. I was wondering if any of you knew of a good general set of useful caps that might be suitable for monitors?

I realize not every cap would be covered of course, but I've seen sets like this one which looks decent value: http://www.ebay.co.uk/itm/1uF-2200uF-25-values-125pcs-Electrolytic-Capacitors-Assortment-Kit-Assorted-Set-/190844136286?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item2c6f326b5e

Would that be a good starting point or should I double check the caps needed first and try and get them separately? Cheers.
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
personally id make a list of all the caps needed as per ur monitor type
id then double check the above link

since most only hit 50v

i doubt that many would be usable,but u never know i always have a massive stack just incase

i found china was the cheapest form of electrolytic caps in massive kit form

sometimes US ebay even does the full kit and saves hassle

an d also i usually upgrade to 105c instead of the usuall 85c

forcefulfil2014-10-19 18:48:49
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I bought an almost identical kit and to be honest most are no good for the monitors I have looked at.

Still for the price they are worth having just incase.

Steve
 

LAZORIAN

Active member
vacBacker
Feedback
2 (100%)
Credits
260CR
Great, thanks for the info.

I haven't checked the price of individual components from any of the usual big suppliers and wondered if I could at least cover a decent number of the smaller caps more often used.
I have various other electrical bits of kit that could do with recapping so a decent variety to choose from might be handy. As you say I should really make / find lists of all the stuff I need first really
smiley1.gif
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
My cap bank has been built up of doing exactly what Forcefulfil suggested, I worked around a chassis or two and wrote down every electrolytic used, some are common to a few types like 1uf/250v and 10uf/50v and a few similar in the 160-200v range.

I did got a bit crazy and buy in the 100 at a time arena on a lot of them and 30-50 on the more expensive ones and like said, try and buy 105 degree C caps as there are some areas of different chassis that can get hotter than 85 degrees under normal operation.

Now I can have a poorly chassis on the bench and recap it by just picking out of the drawers, I have about 50 different capacitors plus some poly's and a few other types.

Remember that if you have a cap at 1uf/16v and you only have a 1uf/25v cap on hand the 1uf/25v cap will do just fine but just don't alter the 1uf side of it.

Take special note as well of which way round the cap was when you pull it out of the chassis as not always the silk screen is right - just had a Kortec with exactly that issue, got a cap the wrong way around and pop it went.
 

LAZORIAN

Active member
vacBacker
Feedback
2 (100%)
Credits
260CR
RGP said:
Take special note as well of which way round the cap was when you pull it out of the chassis as not always the silk screen is right - just had a Kortec with exactly that issue, got a cap the wrong way around and pop it went.

Thanks James forgot about that but did hear about this before - something to look out for!
 
Top