Cap Values

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Hi all, i am trying to place a order at cpc for some caps to repair my space invader monitor.

I am looking for 2.2uf 315v but all they stock are 2.2uf 400v.

Would these be ok?

Am i right in thinking that as long as the voltage is slightly higer they would still do the same job?

I also need other values but the voltages they stock are higher than i need.

Cheers,

Steve
 

obcd

Active member
Credits
3,830CR
Higher voltage is fine, but they are usually bigger in size. Sometimes you don't have much space on the pcb to place a bigger capacitor. The voltage value of a capacitor is the maximum voltage the capacitor was designed for. Another interesting parameter of capacitors is the expected lifetime. That can vary from 2000 hours at maximum temperature to 10000 hours. Obvious there, bigger is better.
 
Top