capacitors/equivelents

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
Hi Guys,

I have a pcb here with a few damaged ceramic disk capacitors,

they are 1uf +/- 20% 50v ceramic disk capacitors

I cannot find a exact replacement type on e-bay.

can anyone here help? i need nine but will buy a lump if needed.

is there a modern equivelent i can use?

thx

phil
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
What problem are you having finding them? If you can't find any with such a large tolerance you can substitute something with a finer tolerance, e.g. +/- 5%.

Cheers
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
Just had a look on Farnell and they only do two varieties of 1uF in ceramic, so I'm guessing that it's quite rare to have a capacitance that high in ceramic which is probably why you can't find any.

FWIW, here is the Farnell link: http://uk.farnell.com/jsp/search/browse.jsp?N=0+110029771&Ntk=gensearch&Ntt=ceramic+disc+capacitor&Ntx=mode+matchallpartial&suggestions=false&ref=globalsearch&_requestid=741375&No=0&getResults=true&appliedparametrics=true&locale=en_UK&divisionLocale=en_UK&catalogId=&prevNValues=0&mm=1000002||,&filtersHidden=false&appliedHidden=false&originalQueryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN%3D0%26Ntk%3Dgensearch%26Ntt%3Dceramic%2Bdisc%2Bcapacitor%26Ntx%3Dmode%2Bmatchallpartial%26suggestions%3Dfalse%26ref%3Dglobalsearch%26_requestid%3D741375%26No%3D0%26getResults%3Dtrue%26appliedparametrics%3Dtrue%26locale%3Den_UK%26divisionLocale%3Den_UK%26catalogId%3D%26prevNValues%3D0

Maybe it's going to be a case of stacking some smaller capacitors in parallel? Caps in parallel add to the total capacitance, but looking at my shelves I've only got ceramics in 0.1uF so that's quite a stack
smiley11.gif


Have you got the cap value from schematic or from an existing cap? Is it possible the schem is wrong? Are they acting as decoupling caps or serving some other purpose?
 

launton

Newbie
Credits
11CR
Try these:

Mouser

Or if you're feeling flush there's some in this box (depends on how much work you do at component level)

Bitsbox (£10.99 for 300 mixed caps)

if you go here and scroll down he has some at that value for 12p

http://www.bitsbox.co.uk/cercaps.html

Ceramic_Capacitors_2011-08-20_17-51-05.png


clicky linksConners2011-08-20 17:54:01
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
The only ones i could find that were close on the links were multilayer ceramic disk capaciotors,are these a suitable replacement for a ceramic disk capacitor?i thought they were different completely.
phil
 

launton

Newbie
Credits
11CR
I'm sorry I don't know the differences, I was looking mainly for voltage, rating and tolerance. Perhaps email them and ask if they would be suitable?
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
The 1uF in that Bitbox selection pack is an electrolytic, not a ceramic so you may have polarisation issues depending on what it's being used for.

My understanding is that most ceramics of higher capacitance are multi-layer and have been as that's the only way of getting the larger capacitance (that you'd normally see with an electrolytic) from a ceramic.

What function are these performing as that's helpful in knowing what to recommend as a possible substitute. 1uF seems quite large for a decoupling cap so it's either supporting something which is switching quite a bit of power or it's not a decoupling cap and has some other function instead.

So ideally could do with a better idea of what it's being used for (it could be these aren't even required!) to recommend a suitable replacement. But if you want to just order then go for those individual Bitbox MLC ceramics above.
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
Hey Tim,
Due to my massive understanding of electronics and there workings i just stick to the schems if some one would be up for working through it with me i could post up the pcb schems?

im up for learning/however i understand these nooby questions can be a pain in the arse for the tech guys here

phil
 
Top