Chase HQ

terriblefire

Newbie
Credits
15CR
I Managed to get myself a Chase HQ Cab this week. It came with a dodgy board so i'd already lined up a spare...

Unfortunately the spare has just thrown an ROOT MPU RAM Error. Does anyone know which IC's these are.
 

terriblefire

Newbie
Credits
15CR
Thanks. it should be easy to confirm that on the bench.

The other board has no blue video out and i think there is bad ram on the video board. I confirmed the video isnt corrupted after swapping the video cards. Oh and no sound either. But all the self tests pass so it may just be the DACs.

I'm resisting the urge to socket the 68000s and slap pointless accelerators in there.... must ... resist...

terriblefire2021-08-16 08:47:25
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,332CR
Interesting. Video might be a bad track or connection - the RGB DAC is a custom potted riser PCB in one corner of the CPU board and it often gets bashed or even smashed off (something to look for when buying 'untested' boards).
Sound is fairly easy to check if you've got a scope - can see the stream from the YM into the DAC and the subsequent analogue outputs into the op-amps (and then main amp).

I'm not sure it'll work any different with a faster 68000 in there - it's all synced to 60Hz and I don't think the CPUs fail to execute code in their window.

I've got a triple 68000 proto here and it doesn't run any quicker (sharing the load between CPUs).
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,332CR
Heh - I missed the word 'pointless'
smiley36.gif


Forgive me, despite your username, I didn't initially realise you're the guy who makes the Amiga accelerators - good to have you on here
smiley16.gif
 

terriblefire

Newbie
Credits
15CR
John Bennett said:
Interesting. Video might be a bad track or connection - the RGB DAC is a custom potted riser PCB in one corner of the CPU board and it often gets bashed or even smashed off ....

... Prophetic... I just put the tiniest amount of force on one to have a look under it and it broke off in my hand. Well i think these are going to be long term projects :D
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,332CR
Aww
smiley19.gif

That module does have ‘repro me’ written all over it, especially the way Chase HQs are becoming the next Outrun for daft prices.
(Although I presume yours is bodge-able via dremel and nicking legs off 74xx’s )
 

terriblefire

Newbie
Credits
15CR
I found some repro gerbers... My account at JLCPCB has so many vouchers i managed to get them ordered for the postage... so lets see how i get on ..
 

terriblefire

Newbie
Credits
15CR
John Bennett said:
(Although I presume yours is bodge-able via dremel and nicking legs off 74xx’s )

Oddly, despite having quite a stock of various components... I have no through hole whatsoever. I guess its time to bite the bullet and get a desoldering gun too.
 

Bods

Senior Member
vacBacker
Feedback
5 (100%)
Credits
5,414CR
Taito pcbs with Sound Fault, most of time Op Amps from my experience, if it's not missing 12V to power the amp anyway

Look forward to working on the Space Gun boards, sure they would of been op amp but had the all the Main Audio chips removed, replaced and not in mess and probably all done for nothing
 

terriblefire

Newbie
Credits
15CR
I had some time to look into the board with the sound issue. I traced everything to the DAC. its getting data and clock. I can hear music if i hold pc speakers input cable in one hand and poke the dac with a finger on my other hand. But CH1 and Ch2 do not move... they are stuck high.

Visual inspection has me thinking that the DAC has already been replaced...

So either there is a line holding the DAC in mute, there is line not doing whats needed or possibly the downstream amps are holding CH1 and CH2 high and not letting the dac do its thing.

Any thoughts?
 
Top