Chasis help needed wells gardner

Credits
1CR
Hello Chaps,

First time forum poster, long time lurker.

Long story short I purchased a generic cab years ago with golden axe in it, one day in 2007 the monitor just went blank. I think I was adjusting voltages on the Power supply and blew something.

I believe that the chasis is knackered.
smiley5.gif
however i'm not sure what type of chasis it is I believe it is a Wells Gardner but im not sure which one. The monitor is a 19" so would this be a k7000?

possible cap replacement? resistors may be blown. im at a loss. As I say it's my first post so any help would be great.

ive been looking at universal replacements but i'd like to try and attempt repair on this.

Cheers

Jon,
IMG_1207.jpg
IMG_1208.jpg
IMG_1209.jpg
IMG_1210.jpg
IMG_1211.jpg
IMG_1213.jpg
IMG_1214.jpg
 

smarty

Ready Player One
vacBacker
Feedback
12 (100%)
Credits
1,305CR
The 'monitor' wouldn't really have an adjustable psu as such, it will have a mains input via an isolation transformer. The thick black/white 2 pin connector is the supply to the monitor. You may have blown a main input fuse as tb says. Follow the path of the mains cable coming into the cab (with cab powered off!) And check for fuses first.

What were you making adjustments fororiginally before the problem?
 
Credits
1CR
I should note that im getting sound off the golden axe board hence my original suspicions. Thanks for the help so far guys. I am a newb in terms of fixing this stuff :)
 
Top