Chassis ID no 2...

ben76

Hunts Spies
Feedback
7 (100%)
Credits
1,136CR
Yeah the cab was pretty clean inside overall anyway Ronnie.
Grant any good as a monitor or a charge holding piece of.... As if it doesn't work it's either going to you to fix or would it be time to find a new one altogether?

Cheers

- Ben
 

ben76

Hunts Spies
Feedback
7 (100%)
Credits
1,136CR
ben76 said:
Yeah the cab was pretty clean inside overall anyway Ronnie. Also not sure if broke or the pcb atm
Grant any good as a monitor or a charge holding piece of.... As if it doesn't work it's either going to you to fix or would it be time to find a new one altogether?

Cheers

- Ben
arse was meant to have edited the other post... Clean up in aisle 3.... Lol

- Ben ben762016-08-17 20:39:40
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
They are crap monitors Ben! sorry best give it to me to dispose of safely before it electrocutes you
smiley36.gif
 

ben76

Hunts Spies
Feedback
7 (100%)
Credits
1,136CR
Ronnie Dent said:
They are crap monitors Ben! sorry best give it to me to dispose of safely before it electrocutes you
smiley36.gif
I have no monitor fear... I still remember Luke Wells backing away from my OP Wolf and me when I said so this is the part not to touch... Whilst prodding the anode cap with it powered up
smiley4.gif
smiley36.gif


I also got asked to discharge a monitor for someone... The closest thing I had I use was a pair of kitchen scissors ...worked really well too as I could easily close the anode cap pins
smiley4.gif


- Ben
 

jengineer

Senior Member
vacBacker
Feedback
49 (100%)
Credits
1,205CR
I wouldn't work on a microvitec if you paid me with free hookers for a week, I can get hold of around x10 of them for free if anyone with a death wish wants them?
 

ben76

Hunts Spies
Feedback
7 (100%)
Credits
1,136CR
So I've made an adapter to connect jamma pcbs. The monitor works...



I'm guessing these are the pots to do the adjustments?



So are they the ones or are they somewhere else? Is the monitor complete sh*t or stick with it?

- Ben
 

ben76

Hunts Spies
Feedback
7 (100%)
Credits
1,136CR
big10p said:
Just looks like Hsync pot needs a tweak. Not sure where it is on that chassis, though. Are there any markings on the PCB?
it's all under the monitor so before I start dismantling it I could do with an idea of where they are :)

- Ben
 
Top