chihiro comunication error type 3

Retroman839

Senior Member
vacBacker
Feedback
13 (100%)
Credits
8,290CR
im using a naomi pi and piforce tools with chihiro type 3

-known good core base board -

- THE media board DIMM check is all good -

but when i try to ping the chihiro i get no success

BOTH SET IP AS 192 168 1 2

255 255 255 0

I can set ip on core but not on the medi dimm type 3 board?

MY PROBLEM IS when i try to set ip address on the media board i get comunicaton error

i have tried re conecting the board and little preasure when conected no joy,

i have the jumpers set for netboot

was wondering if it is the jumpers on the next board down the middle board as it were?

i have upgrader the type 3 to 1gb and set the jumpers no worries all that is ok

and it checks out all good

just cant get the network going

Retroman8392021-11-13 11:14:35
 

Retroman839

Senior Member
vacBacker
Feedback
13 (100%)
Credits
8,290CR
will try that…

on the lindbergh i just fried my type 3 io…

put 12v on the 5v pin! the little white relay don’t click on no more … this hobby!!

i have a spare…
 

Retroman839

Senior Member
vacBacker
Feedback
13 (100%)
Credits
8,290CR
yeh because im also trying to change the chihros region lock as well

30x press service button in service - this also wont work for me

15x presses bring up the first message on screen but not the region change option after the 30x presses

but i have read that this requires the correct pic for chihiro [ diffrent to naomi 0 pic?

also need to check that my no 5 jumper is set into the off position on base board

Retroman8392021-11-13 16:47:55
 
Top