Chihiro tech

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I have just started trying my new outrun 2 twin but problems already!!!!
The first chihiro is showing all power leds but then green and red flash in sequence. Fan looks siezed so i guess the core board is toast!!!!
Tried re seating cables inside chihiro now all I get is the power leds. I have 3 more to test so fingers crossed.

Any idea what the green and red leds mean? I have looked on line but couldn't find too much info. I must admit I haven't looked for a chihiro manual yet but not sure if they exist.

If the core boards faulty has anyone got a worker on here try would sell or trade?

Thanks
Steve
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
Don't even turn a chihiro on until you've replaced the fans dude and possibly caps.

They die within minutes if the fan is toast.
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Are they that bad? I thought if I got them powered up at least I could tell if they worked.

Maybe I need to order some spare fans. Problem is that if they are all faulty it's more wasted money.

Anyone else have any advice?

Thanks Oll point noted and I won't power the others up tonight.

Cheers
 

obcd

Active member
Credits
3,830CR
Yes, 3 major problems with chihiro mainboards.

1. Overheating gpu due to gpu blower failure. Usually the pcb is discolored at the back of the gpu.

You can simply power the blower and check if it still works.

2. Leaking goldcap. (That's an issue xbox motherboards were having as well.

3. Bad capacitors surrounding the cpu. Sometimes you can see that one of them bursted open.

As it's almost every time that board that is broken, they are hard to find and expensive.
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
As I just found out with mine
smiley19.gif

Was working fine for years, then suddenly the fan stops on one power up, and that's the end of that!
 

obcd

Active member
Credits
3,830CR
Does it really go that fast when the gpu fan stops.

I was under the impression that it kept running like that unnoticed until one of the gpu solderings becomes bad due to overheating or the gpu fails due to that.

I also heard that there is a 50% chanche that reflowing the gpu bga fixes it's issue. (at least for a short period)

Very curious if it would be possible to install extra ram on an xbox mobo and reflash it with a (modified) chihiro bios to use it as a replacement chihiro motherboard. The ram chips are still sold on ebay, and a second hand xbox is cheap nowadays.
obcd2015-11-09 21:58:07
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Thanks for the link and yes the avip cable is connected.
I have tried my other one and fans all run and I get the title screen with the error 02 main board malfunction!!!
A quick look on klov and it says it could be the super caps at fault. I think I will get them off for repair.

I was trying to move over from model 3 step 2 as it was too unreliable, maybe chihiro is no better!!!!

Thanks
Steve
 

obcd

Active member
Credits
3,830CR
To my knowledge, the chihiro should even work with the goldcap removed. You will need to remove some of the corrosive spilled liquid around that goldcap as well.

We have both sega model 3 step 2 and chihiro in operation. On the sega model 3 we had problems with the power supplies, but never with the boards. On the 3 chihiros's, we have already 2 broken gdrom unit's and now one with a fried gpu. Reflowing didn't fix the issue. The outrun 2 twin which is having 2 of the chihiro's came with sanwa monitors and terrible picture tubes. Both already needed to be replaced due to the red gun becoming weak causing terrible colors. Our sega rally 2 which is much older still runs the original monitors. There is a visible burnin where the credits are displayed, but that's a normal aging issue. I leave the conclusions up to you.
 

AndyGeezer

Active member
Feedback
1 (100%)
Credits
599CR
Chihiro is hands down the worst sega system in terms off long term reliability. 70% are beyond repair.

This is why I developed the Lindbergh editions including 640x480 crt edition.

You can still buy nos lindy mainboards, video cards, motor boards etc.

Also the sp dimm battery thing is too annoying.
 

AndyGeezer

Active member
Feedback
1 (100%)
Credits
599CR
vib_ribbon said:
is it as bad a daytona usa for failure rate?

Worse IMHO.

Daytona is a lot older, and most of the Daytona issues are down to pin lifting, spills and corrosion, there is parts out there to repair those, like the Surface mount OTP flash rom, rams, buffers, rom boards from 2A CRX can fitted once you chop them down.

Burnt out GPU, or failed MXCP is disaster news, if NOS then Chihiro will last years in a home environment - shame I sold all my NOS boards years ago..
smiley5.gif


You can still buy replacement core from Sega - fully refurbished ones, but they are £495.
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Ok tested another today and I get green led then followed by a solid red led and flashing green showing status of chihiro.
Game sound like its resetting but no picture or sound.

Any ideas? I know the first one I tried is the core board which is toast so I have a scrap chihiro for spares.

Any help,would be cool as I want to get this cab up and running if possible.

Thanks
 

Ordyne

Active member
vacBacker
Feedback
5 (100%)
Credits
1,282CR
Hikaru is the worst system, chihiro mainly fails as it's never serviced and people expect never to replace or check fans.

The super cap is not needed? You can remove it altogether.

Regarding converting an Xbox board, there's a lot more to it than ram and mcpx'
 

segaarcade

Active member
Feedback
1 (100%)
Credits
118CR
i had NEVER a Problem like this with any of my chihiros. but i care a lot more about my arcade stuff, then other peoples do. i replace the fans, give every pcb´s a main-clean, then i clean it multible times! Keep your stuff clean! the green flashing led´s are normale.
 

obcd

Active member
Credits
3,830CR
It's easy talking like that if the chihiro is only for private use. If they are running in an arcade 14 hours/day, you only realise the gpu fan wasn't running anymore when it's to late. It's not like an external fan that can be quickly checked. The normal filosofie "If it ain't broken, don't fix it" is the way most arcade owners treat their machines.

Considering using an xbox mobo. Besides the mcpx being different that would require other xcodes in the chihiro bios, and the extra ram chips that would be needed, I never found any other documented differences. The eeprom contents are different as well, but copying those can't be much of a problem. Maybe the pic processor is programmed differently. Further, the more recent xbox mobo's used a different video encoder chip. You might need to look for one with a 1M tsop flash chip. Such a flash can hold both the chihiro bios and a normal xbox bios. That second one can be used to prepare the motherboard. Obvious, you will need a functional LPC connector as well. I doubt it has been tried yet, but I have no knowledge of failures either.
 
Top