coin mech help

jrm88

User
Credits
13CR
I have recently purchased a tmnt arcade cabinet Which I'm in the process of receiving.

However, the seller said that the machine only takes older ten pence pieces. Depending on the way the mechanism was set up can this be true and if so is it easy to adjust ?

Appologies if this is a daft question, but this will be the first machine I have ever owned and there seems to be so much to learn
 

obcd

Active member
Credits
3,830CR
It depends upon the type of coin acceptor in the machine.

You have mechanical ones that route the coin dependant of it's size, thickness and weight.

You have electronic coin acceptors that measure the variation of the current trough a coil when a piece passes that coil.

Some brands of electronic coin acceptors can be learned a new coin by changing some dipswitches and inserting a number of coins.

Some brands of electronic coin acceptors use freely available software to program a new coin in the system.

Some brands ask (a lot of) money for their programming software.

Older electronic coin acceptors used a prom that contained the coin information.

So, as long as you don't know what is in your machine, the question can't be answered.
 

jrm88

User
Credits
13CR
Thanks for the reply. I will be sure to check it out when it comes on Thursday. I was just wondering if was an excuse for the machine not accepting coins.

I have a couple old ten pences to test.On it, so if they work I may just stock up on them and let the mech be.
 

obcd

Active member
Credits
3,830CR
The seller might be telling you the truth. If the machine hasn't been in exploitation after the new pieces came out, why would someone care about the coin acceptor. Notereaders are an even bigger nightmare when new notes come out. It's a good excuse for manufacturers to force you to update to their latest model which is just mechanical not 100 compatible.
 

69er

Active member
Feedback
6 (100%)
Credits
1,851CR
by 'older' 10p pieces he may just mean those issued between 1993 and 2010.......

the NEW new 10p (2011 >>> 2015 on) is now 0.2mm wider and magnetic steel based material though diameter size and weight remain the same........ easy to sort them just hover a magnet over a mixed handful.

if you have old pre '93 big 10p it is possible to interchange most acceptors to a similar more up to date one............ often easily available on arcade forums sales or ebay ......

with electronic multi coin acceptors there are companies and a few people on these forums who will reprogram some mech types for a small fee ...... plus postage expenses.

69er2015-09-11 10:53:16
 

jrm88

User
Credits
13CR
Thanks for the info 69er. I've got a variety of ten pences I'm going to try at the weekend.

Once I've cleaned everything up I will work out what I need to work on. I think these forums will be very helpful in the future
 

jrm88

User
Credits
13CR
So I was testing out the cabinet yesterday, managed to source a few pre 90 ten pences. Threw in two or three and they were spat straight back out. Out of desperation dropped a pound coin in and boom lights on.

When retrieving the pound I found a few shiny new ten pences. The previous owner must have seen the sticker ten pence only and didn't bother to try anything else.
 
Top