coin recever help!!!!!!!!!!!!!

exeterarcade

Newbie
Credits
2CR
So me and a frend are building a few masheans out of old laptops but are having a pain with the coine recever!!!
we are at the stage that were looking to find a coine recever with power supply we can just plug in and go!

anyone got any links to any in uk???
 

obcd

Active member
Credits
3,830CR
pretty much all coin mechs I am aware off need at least 12V to operate properly. It's used to activate the coil that diverts the coin path when the coin is accepted. There are coin mechs that don't need any electricity. Those simply check size, thickness and weight of a coin and only accept one type of coin. The coin activates a microswitch in such case that coins up the game.

Most commonly used nowadays are 3.5 inch coin acceptors. They can accept up to 6 different coin types. They use a 10 pin flatcable connector that is pretty much standardised. There are several brand like NRI, Alberici, Coin Controls that are compatible with each other.

All you need to use such is a 12V power supply and a pc interface. A small arduino board can for instance function as pc interface. If you have an interface for arcade joysticks and buttons, it has "coin in" lines as well.
 
Top