Commando - missing background

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Hey. Looking for pointers. A few years back I was into the scene and salvaged an old Commando cab from Jengineer, replaced the monitor which had awful screen burn and didn’t work anyway, and added my own Commando PCB and it was great.

Over last couple of years life gets in the way and I haven’t used it. Until last night. Turned into. For the first time in ages and the game boots and I get the text but no background and there is some corruption the logo.

Any ideas where to start with what may have failed with the passage of time?
 

sukhbir

Active member
Feedback
46 (100%)
Credits
1,733CR
Yes agree,most old pcbs do suffer from oxidation,I usually pull all EPROMs out and clean the legs using a electric dremmel with a brass circular brush.once cleaned I brush in contact cleaner in the eprom sockets and that gives a lasting service.
 
Top