Now that I had a fully working Commando I was able to make the repair of the second board fairly easily.....or so I thought
Checked the top board on the working PCB and that was ok. Checked the lower board and this was also ok, so the faults lay in the middle board. This is what I was getting to start with:
https://flic.kr/p/wg87aM
I spent literally days going through this middle board looking for faults and could not find anything wrong, so then started to suspect the program rom sockets or the IDC connectors. I flexed the IDC connectors and it made a change on screen so I thought this was the mostly likely fault, but swaped both anyway. Here is the PCB fitted with the new headers fitted:
Fired up the PCB and voila! Game was working as expected and everything was back!
Checked the top board on the working PCB and that was ok. Checked the lower board and this was also ok, so the faults lay in the middle board. This is what I was getting to start with:
https://flic.kr/p/wg87aM
I spent literally days going through this middle board looking for faults and could not find anything wrong, so then started to suspect the program rom sockets or the IDC connectors. I flexed the IDC connectors and it made a change on screen so I thought this was the mostly likely fault, but swaped both anyway. Here is the PCB fitted with the new headers fitted:
Fired up the PCB and voila! Game was working as expected and everything was back!