Commando Repair #2

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Now that I had a fully working Commando I was able to make the repair of the second board fairly easily.....or so I thought

Checked the top board on the working PCB and that was ok. Checked the lower board and this was also ok, so the faults lay in the middle board. This is what I was getting to start with:

https://flic.kr/p/wg87aM

I spent literally days going through this middle board looking for faults and could not find anything wrong, so then started to suspect the program rom sockets or the IDC connectors. I flexed the IDC connectors and it made a change on screen so I thought this was the mostly likely fault, but swaped both anyway. Here is the PCB fitted with the new headers fitted:

19240915023_f6a5189bb6_c.jpg


Fired up the PCB and voila! Game was working as expected and everything was back!

19673799278_8f8da470da_c.jpg


19675359169_c55f505de3_c.jpg
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
This board started to reset and I noticed that the PST518 was going a bit mental, so swapped it today for a replacement and PCB now seems rock solid
 
Top