Commando Repair

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
I got a faulty Commando PCB from Big Phil. On quick inspection the PCB was in really nice condition, but I noticed that several of the ribbon cable pins had been bridged together???

16054100243_815bb9a08b_z.jpg


So I undid that:

16486618520_d593616e3b_z.jpg


and firing up the game the first time I got this:

https://flic.kr/p/rpqNDk

So a couple of things I noticed:

1) Copyright message was stuck over to the left
2) The soldier had 3 heads :)
3) Commando logo was missing?
4) In game graphics were bad

So I removed all the 2114 RAM from the bottom PCB, as this is well known to fail and cause gfx issues, and put sockets in.

16051724464_d8ca979975_z.jpg


All 2114 ram checked out apart from the IC at 1A which had failed:

16466757057_76907f49c8_z.jpg


Replaced this IC and then powered up the PCB and got this:

https://flic.kr/p/rpkyWh

1) Copyright issue was still there
2) Solder was fixed!
3) Commando logo still missing
4) In-game graphics looked fixed!

So I had a quick go and all seemed well in-game. Started a new game and then noticed I couldn't move the soldier, so powered off and on, and then I couldn't even credit the game!!!

So to add to the list

1) Not able to credit or start the game
2) Not able to move the soldier.

I assume that the IC that controls this suddenly died as I was playing the game
Purity2015-02-28 18:43:13
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Had another look at this today. The aim was to try and find the fault that had stopped the credit / start, and soldier movement working yesterday.

Dug out the schematics, and started to look at the I/O section. I knew the fault was on the middle board so gave it a quick look over.

....and something I have never seen before! Two chips had been piggy-backed and had just been left like that????!!??! Weird!

16497058488_cf5bf6620a_z.jpg


So I re-alligned these chips and hey presto the crediting and player movement was back!

So I desoldered the chips underneath and indeed they were both faulty. Put some sockets in and put the piggy-backed chips in the sockets.

Powered up and everything was as it was yesterday, apart from there was now a yellow tinge to everything, so started pressing down on the colour mix chips, and VT5 brought the white back, so a faulty socket on this chip to change aswell.

Purity2015-03-01 17:26:30
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
So I've looked at the video again https://flic.kr/p/rpkyWh, and noticed things that I missed the first time round. Most notably that all the text is duplicated!

Also the score at the top is missing, and the =6 text is duplicated in game.

Still got quite a bit of work to do on this
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
I took another look at this yesterday in order to try and fix the outstanding issues I had with the PCB, which were:

1) Duplicated text
2) Copyright message shifted to the left
3) Commando logo missing

So I knew the fault was likely to be on the middle board, as the text that had the issues was stored in IC 5D. I confirmed this by removing the IC and powering up the game and all the text that had issues disappeared, which was expected.

So I started to probe around the character rom/ram section and noticed that chip 7K had pin 10 stuck low. I went back a step and noticed that the chip 5J also had pin 6 stuck low, and was not operating according to its datasheet. Removed the chip and tested it and it had failed.

Put a new socket on and new LS86 and issues 1-3 were fixed! All logos and text were back, and were not duplicated anymore.

However in looking for these problems, the sound on the PCB managed to die so I now had a new problem to look at :-(

Had a quick look at the sound problem this morning. The sound z80 was operating normally. so had a look at the Yamaha 2203's and noticed the clock pin at pin 38 was dead. So I traced this back to the LS74 @ 11E and that was completely dead. Replaced with a socket and new LS74 and the sound was back!

All fixed!

19610201689_4fec736cf2_c.jpg

Purity2015-07-18 12:30:07
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
New day and new Commando problem :-(

This time I power up the PCB and cannot credit a game. Sometimes it works and sometimes it doesn't.

So I look at the I/O section and pin 10 of 6B to see if a credit is getting registered when I press the button. Yes it is, so that's ok. Then I notice the enable pins on 6B are stuck high so the chip is not doing anything.

So I trace this back to the 138 @ 3A and the outputs are stuck high, wheras I can see that the inputs into the chip look sound, so I suspect this chip has failed.

I stick the logic comparator on it and it confirms problems, so take the chip out and it tests as failed

New socket and chip on and can now credit the game, as the enable pins are now working as expected
 
Top