Cosmic Alien - Invadar Lot

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Doing a repair for AnthonyGraham on Cosmic Alien.

Game won't boot in cab but would initially come up with game and garbage on bench.

Started out as just blue everything on screen - traced to a bad 74LS253 @ B9 - restored red and green.

Then kept getting garbage over the top of everything - reseated all ROMs - garbage gone.

During debugging blue died, replaced 74LS253 @ B10 - All colours back.

I have no flying aliens or no ship - but can move blind and fire and score.

I have figured out on the schematic that signal CRS is starfield, CRL is the lower playfield (text and aliens in formation) and CRH is upper playfield (sprites).

I see jagged intermittent lines zig-zagging down the screen but no actual ship.

The RAM at D9 seems fine, its preceeded by 2 x 174's at D7 and D8, the outputs of D8 are constantly HI but that's because its inputs are constantly HI.

D7 is receiving signals as but at the point where CK is rising there is never anything on the inputs other than HI so the outputs never change.

I'm thinking that the data is getting there but the clock signal to the 174's is wrong - its fed off the output of R4 whos inputs are all from a 161 at R1 - hmmm, can't count, can't draw.

Anyone else ever worked on one of these?
 
Top