CPS-A custom replacement soon?

rockbottom

User
Feedback
1 (100%)
Credits
135CR
https://twitter.com/WydD/status/1416405918128951297
https://twitter.com/WydD/status/1417236618042347526

Reverse engineering project at 93%
smiley32.gif


Big respect to Loïc
smiley41.gif
https://twitter.com/WydD

The
main aim is for accurate emu/mister etc. but will also open the way to
some kind of replacement for all those dead A customs out there
smiley2.gif
 

yoganuggy

Active member
vacBacker
Feedback
2 (100%)
Credits
654CR
This is great to see but I honestly thought all mister cores were already emulating to the logic level and cps1 A chips were fully understood. Seems is not the case for the cps1 core anyway.
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,332CR
yoganuggy said:
This is great to see but I honestly thought all mister cores were already emulating to the logic level and cps1 A chips were fully understood. Seems is not the case for the cps1 core anyway.
Oh heck no. That’s one of the frustrating things about MiSTer and FPGAs - there’s a tendency for folk to think the author has done a cycle-accurate, gate-level repro of a board, whereas you can choose what level to emulate to - e.g. make up your own sound and video hardware and just get it to look correct (how MAME generally already works). The result is of little use for reviving dead hardware. Getting Patreon cash for churning out cores can’t help that.
(Of course, some cores do go the whole hog to something usefully accurate
smiley16.gif
)

Anyway it’s great to see this decapping is still going on away from that. The next step is working out how you apply it to replace a 5V TQFP without making a spiders web/frankenboard.
 

rockbottom

User
Feedback
1 (100%)
Credits
135CR
John Bennett said:
The next step is working out how you apply it to replace a 5V TQFP without making a spiders web/frankenboard.

It will have to be a sub board of some kind, a pin compatible 5v chip simply doesn't exist
smiley19.gif

But doesn't mean it has to be ugly, it could be a tiny PCB with castellated edges soldered directly onto the footprint, or a flexi-pcb adapter of some kind.
We need to get creative
smiley36.gif
 
Top