CPS2 Battery

channel27

Active member
vacBacker
Feedback
12 (100%)
Credits
1,377CR
Hi all,

Can someone give me a link to the best supplier for replacement CPS2 batteries, please?

Do people generally go down the straight swap route or fit a battery holder?

Sorry if this has been asked many times before, but I can't find a reference to it...
smiley4.gif


Cheers,

Rob
 

seanr28

Active member
Feedback
9 (100%)
Credits
319CR
personally I would fit a battery holder, Pretty sure that they are 3.6v.....someone should confirm though

this might help

http://www.arcadecollecting.com/dead/
seanr282017-11-03 10:09:04
 

cosine

Active member
vacBacker
Feedback
14 (100%)
Credits
595CR
Aren't the holders not a straight fit though? I think I read somewhere that they weren't. Maybe. Possibly.
smiley36.gif

I just fit a like for like in my cps2 boards, had no issues thus far.
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,332CR
Unfounded fears perhaps, but I'd prefer to solder a battery on as you haven't got contacts (springs and corrosion) to worry about. Suppose someone would've flagged it up as an issue by now though.
 
Top