CPS2 conversion query

VectorGlow

Active member
vacBacker
Feedback
34 (100%)
Credits
900CR
I've been asked if it's possible to convert the Japanese version of Vampire: The Night Warriors 'B' board into the Japanese version of Hyper Street Fighter 2 Anniversary Edition

Does anyone know if it's a relatively simple case of replacing the existing ROMs with suitably programmed EPROMs, or do any jumpers and/or PALs need to be replaced?

Is a specific 'B' board revision required?

Ta.
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
its not that easy nope

first of all Vampire is a PAL D and you need PAL G (inc PAL G Jumpers)

cant convert by wire trick and you need to make sure the MB is a V5 or newer

second of all HSF2 AE is a 64K (8MB) GFX rom and there is no such EPROM that can do that, you need to use Flash TSSOP and make an adaptor or then hack the roms to make them fit the exsiting layout

ive converted boards to HSF2 before now and it was a nightmare working it out silverfox07862015-07-26 22:40:19
 

simonden

Active member
vacBacker
Feedback
20 (100%)
Credits
1,042CR
Phil - Depends on he mother board revision, if it 5,6,7 then it is a lot easier. You just need to burn a PAL G onto a GAL16V8 - files on Porchy's site and then burn the edited ROMs and change a few solder jumpers.

Edit: beaten to it. ^^

simonden2015-07-26 22:58:07
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
The jumpers are important - I spent ages trying to figure out why all my sound samples were wrong despite having done everything correctly. Turned out that the jumpers that weren't soldered were connected anyway! Had to break the continuity by scraping the tracks away. Took a while to figure that one out.
 

VectorGlow

Active member
vacBacker
Feedback
34 (100%)
Credits
900CR
t-m said:
I've got a complete set of ROMs for this as the B board I did it to now has a multi-kit on it.

Thanks. :)

Are these the original ROMs for Hyper Street Fighter 2 Anniversary Edition?

Are they the complete set (sound and graphics as well as program code)?

If so I may be interested, depending on the price.

Feel free to PM me if you like. :)
 

VectorGlow

Active member
vacBacker
Feedback
34 (100%)
Credits
900CR
muddymusic said:
The jumpers are important - I spent ages trying to figure out why all my sound samples were wrong despite having done everything correctly. Turned out that the jumpers that weren't soldered were connected anyway! Had to break the continuity by scraping the tracks away. Took a while to figure that one out.

Thanks for that - I have some spreadsheet info on CPS2 jumpers, but it doesn't cover Vampire: The Night Warriors.

Does anyone know if the Vampire: The Night Warriors jumpers are, be default, the same as any other games?
 
Top