cps2 garbled graphics on boot

DeusVult

User
Feedback
18 (100%)
Credits
26CR
I got s gigawing phoenixed board, seller informed me it worked but now it wasn't working, I was planning to redo the eeproms.

I have been reading about discharging certain caps for certain issues on phoenixed boards

anyone had this problems or know a fix?

cheers
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
re seat the gfx roms thats what usually gives garbled graphics

dont worry about dischaging teh cap, if that was required then you would have a red screen not garble

garble means the phoenix code is fine but gfx roms are not making propper contact or could possibly be corrupt
 

DeusVult

User
Feedback
18 (100%)
Credits
26CR
silverfox0786 said:
re seat the gfx roms thats what usually gives garbled graphics

dont worry about dischaging teh cap, if that was required then you would have a red screen not garble

garble means the phoenix code is fine but gfx roms are not making propper contact or could possibly be corrupt

excellent, it worked, came up with garbled screen for a second then went to the pheonixed screen, gigawing is up and running

thanks alot
 

shoestring

Newbie
Credits
159CR
silverfox0786 said:
dont worry about dischaging teh cap, if that was required then you would have a red screen not garble

Is it always a red screen ?

I had a white screen and couldn't figure out what was wrong before I read about this common problem with phoenixed boards. The game started working again after about a week or so. I assume this was due to the cap holding charge causing random junk to be stored in the nvram decryption table.

I was thinking of removing one end of the cap to avoid this in future.shoestring2015-10-07 00:52:26
 
Top