Data I/o

paulcan69

Can reburn OTP EPROMs! Fear my power!
Feedback
11 (100%)
Credits
945CR
Finally about 2 years after buying it from Guddler, or Macro (can't remember now lol)
It's out and connected to a win 98 PC
Prom link can see it as I have set it to remote mode

Can I get a few pointers please?

So it's a data I/o 29a with a unipak 2

Can I have an idiots guide on just doing a blank check on a rom please?

I tried but it said faulty cs supply
??

But it might be me
As the unipak 2 has a red light under each socket
The one my 256 chip fits in is socket 1
But the red light was only on under socket number 4

Is there a button you need to press to select which socket you will be using?

Thanks
Paul
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
I haven't used mine in anger but I can probably answer a few quetions for you

When you key in the chip type or you select from the list in Promlink, the light underneath the socket lights up to tell you which socket to put the chip in. As far as I know it should only light up one socket

Once you have identified a chip type you can select "Blank Check Only" from under the Program menu

Are you using Promlink 6.1?

BTW I have successfully got this working with DOSbox on Windows 7 and higher, so it saves having an old Windows 98 machine setup

Info here:

http://www.arcadecollectors.co.uk/techinfo/data-io-29a-remote-mode/
Purity2016-08-21 17:14:10
 

paulcan69

Can reburn OTP EPROMs! Fear my power!
Feedback
11 (100%)
Credits
945CR
Further to this
Ok so I will be able to do older roms

For burning of bipolar proms I will need a logic pak yes?
And which adapters/cards to do arcade proms?
What is the most common adapter which will cover the arcade stuff?
Or do you need multiple adapters?
 
Top