Data IO 29B Serial Cable

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
Can someone please advise of which kind of cable I need for a Data IO 29B?

I built one using retroclinic's pinout but it does not work.

I have been advised that a serial cable and null adaptor will work.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
I would say the same. I always used to use a serial cable that I thought was a null modem cable from back in the day, though I could be mistaken.
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
I can build one but I need to know what I need.

The Data IO 29B accepts a Male DB25 connector, the PC needs a female DB9 connector. Somewhere in that mix I need to use a Null Modem Adaptor??

Sheesh.

Equites2014-03-29 17:17:31
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
No, if you're making a cable then just make it up as a null modem cable. I don't know what the wiring / pinout is for a null modem cable but there's nothing active about it, or any adapter required, it's simply referring to the fact that the TX and RX are swapped over so the two devices talk to each other. That's probably an over simplified explanation but I believe it's more or less it.
 

david_orton_2000

Green Mario
vacBacker
Feedback
8 (100%)
Credits
344CR
They did used to be "all the rage" many moons ago, however most people have moved on, however the old Data I/O can do 2708's, so handy.
Sadly, my one only partly works...as in I could never get the serial port to work (probably broken hardware). I know I wired up the cable correctly as RS232 was my thing for ages...
-I still need to change some caps, as they dried out and went "puff" (yes, smoked) on power-up..

There are plenty of wiring diagrams on google for both 9 and 25way, null-modem wiring.

Eventually, I learnt the 'B' codes, so code at least work the beast via its keypad, etc.

Cheers,
DaveO.
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
david_orton_2000 said:
They did used to be "all the rage" many moons ago, however most people have moved on, however the old Data I/O can do 2708's, so handy.
Sadly, my one only partly works...as in I could never get the serial port to work (probably broken hardware).  I know I wired up the cable correctly as RS232 was my thing for ages...
-I still need to change some caps, as they dried out and went "puff" (yes, smoked) on power-up..

There are plenty of wiring diagrams on google for both 9 and 25way, null-modem wiring.

Eventually, I learnt the 'B' codes, so code at least work the beast via its keypad, etc.

Cheers,
DaveO.

I've been reliably informed that using the wrong RS232 cable on the 29B can result in permanent damage to the 1488 and 1489 ICs on the motherboard. They are situated right next to the serial port though, and easily replaced to get it working again.

Its entirely possible that this is the problem with mine also, however, I do know someone that went round in circles trying to resolve the same problem I am having. He also replaced the said ICs in the serial circuit section only to discover he was using the wrong cable. He also tried to build the cable from the retroclinic website which did not work.
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
david_orton_2000 said:
There are plenty of wiring diagrams on google for both 9 and 25way, null-modem wiring.

I used the following diagram which did not work either;

465661627_733.jpg
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
You can use a USB to Serial adapter, yes. I used to with mine. I can't really be of too much help here though as I no longer own the 29B.
 

RaveN

Active member
vacBacker
Feedback
1 (100%)
Credits
1,325CR
I had the exact same issue recently when I was given an old Stag Solar programmer with the same DBF9 and DB25M cable needed.
I tried about 5 different arrangements and in the end this is what worked for me (similar to what you just posted with a couple of changes.):

DB9F DB25M

1-------------4

2-------------2

3-------------3

4------+-----5

|-----6

5-------------7

6------+----20

8------|

7-------------8

9 Not needed

S-------------S

Sorry for the crude ascii art :)
 
Top