Dear Alpha1..
- Thread starter Alpha1
- Start date
ttcaven said:Dear Alpha1, what I need at the moment is this
- the marquee/overhead for Xevious (including the woodwork+glass+marquee itself)
(or just the marquee graphics as NOS -set to be applied on a new wooden structure+glass)
- Space Gun foot pedals + overhead plastic marquee + control panel with guns
- 4 cam locks for the Gauntlet cab (just thought of those, if you happen to have those lying around... )
- lipped T-mold for the Gauntlet CP
- working/nonworking Gauntlet I/II PCB so that I could have a Gauntlet II aswell. (don't want to mess around with the only Gauntlet PCB I have at the moment, working)
I have wooden structure (Crystal Castles), NOS Xevious marquee overlay and a G1/G2 PCB (not sure which one).
PM me buddy
ataritoobin
Active member
Howzabout:
- Taito blue/white bezel like the one below:
- Generic Taitronics CP (blank is fine) with start buttons vertically on right hand side:
- Konami Nemesis/Gradius PCB (working or not)
- Konami Life Force/Salamander PCB (working or not)
- Japanese Sega Space Harrier Instruction Plate
Probably some other stuff I can't think of ATM
ataritoobin2012-10-02 04:33:35
- Taito blue/white bezel like the one below:
- Generic Taitronics CP (blank is fine) with start buttons vertically on right hand side:
- Konami Nemesis/Gradius PCB (working or not)
- Konami Life Force/Salamander PCB (working or not)
- Japanese Sega Space Harrier Instruction Plate
Probably some other stuff I can't think of ATM
ataritoobin2012-10-02 04:33:35
cliff_poole
Active member
Berzerk PCB set. Untested or faulty is fine.
Alpha1 said:L0v3 said:
Thomas you are into more strange sh*t than those dudes with the leather masks
I can only point to Backflipper who has an Exidy Sidetrak from the FunShip.
Says the guy who collects "UK bootlegs since 1898"
Backflipper wants to keep the Side Trak
L0v32012-10-02 09:46:12
Dear Uncle Alpha1,
My name is Ben, for the past 5 years I have had a growing obsession with owning just 3 cabinets, no more cabs, just those three, Outrun (Upright), Paperboy and Outrunners (Now found). In my quest for such grails, I thought if I buy lots of parts I would eventually be able to fine. Ofcourse I have no way of testing all these. Just like others I have realised I could have probably just saved my money and bought a working cab rather than fill boxes up in my loft with parts. However the dream is getting closer, a Champ Sprint is on the way, but alas needs some parts to make her work again, then perhaps I can test the paperboy boards I have for when I get another System II cab for P/boy. So what do I want well......
* Coin Door for System II cab....although I think uncle Alpha may have granted this wish already)
* Bezel/Monitor Suround for System II cab
* Championship Sprint manual & schematics (I have some printed off the internet but some originals would be nice)
* Top shelf, speakers and light fitting from System II cab.
* 19" Medium Res Monitor for system II cab
* Outrunners (left handside art work)
* Outrun Upright Cabinet (can be empty or with monitor, must have side art)
* Something to test all my Outrun/Paperboy/Champ Sprint pcbs
* Paperboy Handle Bar sticker (the one that goes in the middle of handlebars) x 2
(just realised that is now actually 4 cabs, haha, but I could not bring myself to pull apart the Champ Sprint cab for Paperboy rebuilding, so opted to save it and keep it all original)
My name is Ben, for the past 5 years I have had a growing obsession with owning just 3 cabinets, no more cabs, just those three, Outrun (Upright), Paperboy and Outrunners (Now found). In my quest for such grails, I thought if I buy lots of parts I would eventually be able to fine. Ofcourse I have no way of testing all these. Just like others I have realised I could have probably just saved my money and bought a working cab rather than fill boxes up in my loft with parts. However the dream is getting closer, a Champ Sprint is on the way, but alas needs some parts to make her work again, then perhaps I can test the paperboy boards I have for when I get another System II cab for P/boy. So what do I want well......
* Coin Door for System II cab....although I think uncle Alpha may have granted this wish already)
* Bezel/Monitor Suround for System II cab
* Championship Sprint manual & schematics (I have some printed off the internet but some originals would be nice)
* Top shelf, speakers and light fitting from System II cab.
* 19" Medium Res Monitor for system II cab
* Outrunners (left handside art work)
* Outrun Upright Cabinet (can be empty or with monitor, must have side art)
* Something to test all my Outrun/Paperboy/Champ Sprint pcbs
* Paperboy Handle Bar sticker (the one that goes in the middle of handlebars) x 2
(just realised that is now actually 4 cabs, haha, but I could not bring myself to pull apart the Champ Sprint cab for Paperboy rebuilding, so opted to save it and keep it all original)
JohnnyChaos
Blows own trumpet for CHQ cabs
What id like please is a small driving cab thats easy to move, with force feedback and will let me plug more than one game in to it.
Is this the beginning of the end for your collection dude? Or just a "Christ, I've run out of space" moment?My loves are simple; any spare parts for Superbug or Boot Hill and I'd love a cocktail table (easier to sneak into the garage without the "wtf is that" comment from the wife) with something funky to play like galaxians or Mikie. oo! Also, Bank Panic.
I'll update tonight with specific parts for the first two
Milky2012-10-02 10:56:23
I'll update tonight with specific parts for the first two
Milky2012-10-02 10:56:23
Possibles:
A Firefox perhaps. Some mad planets PCBS for stock. Pleides pcb. CV pinball. SA PAL laserdisc if its relatively rot free. Tube panic PCB, maybe some colour vector spares. Spy Hunter. Eprom progger that does devices > 32 pins and bipolar proms. Got any decent test equipment? All subject to prices being sane
karlcdoe2012-10-02 15:47:49
A Firefox perhaps. Some mad planets PCBS for stock. Pleides pcb. CV pinball. SA PAL laserdisc if its relatively rot free. Tube panic PCB, maybe some colour vector spares. Spy Hunter. Eprom progger that does devices > 32 pins and bipolar proms. Got any decent test equipment? All subject to prices being sane
karlcdoe2012-10-02 15:47:49