Defender - no sound

chubsta

Active member
Feedback
4 (100%)
Credits
547CR
Played defender this morning, all was good, came back to it a few hours later and there is no sound - any ideas on what to check, bearing in mind i am crap at this stuff..
 

tb lilley

5 Star
vacBacker
Feedback
2 (100%)
Credits
1,686CR
Worth checking the fuses / holders. There's 2 on the sound board itself.

If fuses check out, try swapping over the volume control and speaker connectors on the sound board. If you listen very closely you may hear pre amp volume coming through the speaker. In which case you probably have a dead TDA2002.
 

chubsta

Active member
Feedback
4 (100%)
Credits
547CR
No luck so far - still not working this morning, checked fuses and switched over the cables, couldnt hear anything at all. There is power going to the speaker because i get that hum you always get when the sound is right up, but there is nothing when i press the test switch on the board. Unfortunately i cant run through the cab diagnostics as i am waiting for a new set of switches to arrive
 

chubsta

Active member
Feedback
4 (100%)
Credits
547CR
Small update, remembered i have a similar soundboard in my Sinistar so jumpered that up correctly, stuck it in the Defender and it worked, so the board is definitely bust, at least that narrows it down a bit, now all i have to do is find out exactly what is broken!
 
Top