Diagnostics using Thermal Imaging Camera

neoretro

Active member
Feedback
11 (100%)
Credits
1,121CR
Hi All,

Was with my pal who used to make PCBs and always comes up with funky ways to fix things.

I was asking him to impart some of his wisdom and he said a good way to diagnose faults is using a thermal imagine camera as a chip would likely show up quickly if it had a fault.

Has anyone done this and does it work reliably? As not going to bother investing if it doesn’t work well.

Thanks

Dave
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,332CR
It can’t do any harm if you have a thermal camera handy, but I’d say the majority of failed ICs don’t get noticeably hot.
And the ones that do because they’ve had an internal short circuit, you can probably smell as well as feel (plus a the current draw from the PSU would be noticeably high, if you had an ammeter).
Plus some chips just do run stinking hot without fans nearby (the palette PALs on Rolling Thunder for example). So maybe it could do harm if good chips get yanked because they naturally run hot.
 

mlynn

User
Credits
121CR
I need a thermal imaging camera to find out where the heat loss is in my house!
smiley1.gif
 

Brettster

Arcade, and the Chuck Norris effect
vacBacker
Feedback
23 (100%)
Credits
1,276CR
I got myself a Uni-T UTI260B with a macro lens add-on for this very reason. not had time to try it out with hunting hot chips yet, but have had a good scout around the house looking for drafts...
 
Top