Display a mirrored image?

didgey101

Newbie
Credits
1CR
Hi Guys,

We have just put the guts of mame cabinet into an upright house of the dead cabinet to give us a larger picture and it looks awesome.

The original house of the dead monitor ran on 15khz so we have installed a 32" lcd tv in its place which works great.

The problem we have is the display is all back to front due to the large mirror over the monitor which displays the image so what I am asking is.....is there a way to get the mame pc to display its output as a mirror image so that it will look the right way round?

There used to be a program called pvcmirror.exe which would do this but it seems to no longer exist.

Any help would be great!!

Many thanks...Tim
 

didgey101

Newbie
Credits
1CR
Thanks for that I will give it a try. Could you possibly tell me how I get into windows on the mame pc so i can try the settings as it uses some kind of front end that boots straight to mame?
Thanks again..Tim
 

tb2000

Active member
Feedback
4 (100%)
Credits
3,579CR
House Of The Dead is 24khz (medium res), not 15khz (standard res). You could've run the pc on the arcade monitor easily with soft15khz, you wouldn't have had to worry about flipping the image either (the image can be flipped easily on a crt anyway just by swapping the yoke wires over)!
smiley1.gif
 

didgey101

Newbie
Credits
1CR
I'd never heard of soft 15khz til now. Just Googled it and that would have been easier to be honest. Weve fixed the new lcd monitor in place over it now so just need to decide what would be the easier fix...many thanks
 

strykr

Active member
vacBacker
Feedback
11 (100%)
Credits
1,351CR
I don't think you will find a solution for that I'm afraid. best way is to flip the yoke wires on the original monitor. I was surprised mame didn't provide an option for this tbh.
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
I think some didn't read the OP post

they have replaced the monitor with a LCD TV

that running via a VGA I assume

si just ca case of using SOFT56K or ArcadeVGA and flip the screen in the VGA settings
 

didgey101

Newbie
Credits
1CR
Thanks for the info. What is soft56k as when I search for that it only comes up with modem drivers? And arcadevga isn't that the graphics card for sale or is it a stand alone program? Sorry to sound so thick..thanks
 

obcd

Active member
Credits
3,830CR
I think they meant soft15khz.

And indeed, arcadevga is a graphics card.

Be aware that the RGB output signals of a vga connector are a bit weak to drive a 15khz monitor.

I know they sell amplifier boards to fix this issue. Some monitors can handle the signals if you turn up the contrast adjustment.

On hantarex monitors, you don't need to change the wires. There are two sockets for the deflection coil connector. One gives a normal image and the other a mirrored image.

But this is only for the original monitor. For the LCD TV you will need a software solution to mirror your image.
 

strykr

Active member
vacBacker
Feedback
11 (100%)
Credits
1,351CR
silverfox0786 said:
I think some didn't read the OP post

they have replaced the monitor with a LCD TV

that running via a VGA I assume

si just ca case of using SOFT56K or ArcadeVGA and flip the screen in the VGA settings

I think you haven't read the OP post. This is not a flip. It's mirrored you can't do that in VGA settings. strykr2015-03-23 01:24:17
 
Top